The 1550A Laser Displacement Sensor is another innovation of Excel Precision. It is designed for measurement that requires high resolution and frequency response. This device can measure a tiny variation of a surface or the Z-motion of an object regardless of its reflectivity or color. Applications such as spindle run-out, concentricity of the part in the chuck, surface roughness, wobbling of a mounted hardware, vibration of the machine, etc. can be accomplished in less than one minute.

The 1550A Laser Displacement Sensor consists of one each of the sensor head, the signal processing unit, and a power supply. The signal processing unit displays the measured results either in unit of microns or in micro-inches. The signal processing unit comes with an RS485 data port. This data port allows the user to acquire measured result for parts inspection, quality control, machine wear-out history, etc.

This device is easy to use and does not require sophisticated installation or alignment procedure. The compact size allows it to be mounted almost anywhere near the measured object. The optional magnetic mounting pad makes it really easy to attach the 1550A Laser Displacement Sensor on machine bed.

Spindle Run-Out Measurement
Defect Detection on a Surface
Surface Deform Measurement
Concentricity between two axes
Vibration Measurement
Displacement Measurement
Alignment
Thin Sheet Thickness Measurement
Parts Inspection
Object Contour Measurement

Features:

·         High sensitivity over a broad measuring range
·         Zero adjustment by software or reset button.
·         Large, easy to read digital display.
·        Power technology allows the sensors to be Daisy chained, up to 16 units,
        to achieve simultaneous data acquisition.
·     RS-485 & RS-232C Serial output.

 

Benefits:

·         Minimizes measurement time, which reduces labor cost.
·         Accurate measurement readings improve production yield,
        which in turn increases profitability of operation.
·         Low cost of ownership.
·         Data acquisition capability allows shop owners to keep record of machine wear out history.
·         Simultaneously operating the multiple units reduces measurement time and improves
        parts inspection efficiency and accuracy

 

INPUT POWER	0.5 Amp @ 120V AC	DATA FORMAT	Asynchronous
DIMENSION	Display - 8" x 8" x 2"	MEASUREMENT RANGE	± 0.5mm
	Sensor Head –2.76”(H) x 2.68" (W) x 1" (D)	RESOLUTION	0.06 microns
MOUNTING	Magnetic Pad or Mounting Holes (for 8-32 screws)	Operating Distance	30 mm
Sampling Frequency	15 KHz	FREQUENCY RESPONSE	5 KHz
Laser WAVELENGTH	670 nm	Laser beam spot	120mm (L) x 100mm(W)
Laser output power	< 5 mW	ACCURACY	±0.05% full scale
DATA PORT	RS-485 &USB	DATA FORMAT	Digital 14-bit